Find technical details, tutorial links, and other information about your Askey LTE gateway.
- About
- LCD Screen
- Tech specs
- Web Gateway User Interface (GUI)
Meet your Askey LTE Wi-Fi Gateway
For more gateway steps, such as instructions on how to install your SIM or reset your gateway, check out our Tutorials.
Askey LTE Wi-Fi Gateway Tutorials
LCD Screen
-
- Green: System is powered on and ready
- Flashing orange: System is booting
- Red: There was an error during or after booting
- Off: Device is off
-
- Battery feature is disabled
- Light will always show red
-
- Green:
Wi-Fi is on - Red: There is an error with
Wi-Fi - Off:
Wi-Fi is off
- Green:
-
- Green: LTE is connected and ready
- Red: There is an error connecting to LTE
-
If you press the LTE button on the front of the
Wi-Fi gateway, the LTE signal strength will display on the Power/System LED.- Flashing green: Excellent LTE signal
- Flashing orange: Good LTE signal
- Flashing red: Weak LTE signal
- Off: No LTE signal
Tech Specs
Battery |
|
AC Adapter | 24W 12V / 2A |
Dimensions (W x H) | 6.69 x 4.88 in (170mm x 124mm) |
Operating temperature range | -20°– 45° C (-4° F –113° F) |
Connections |
|
Network |
|
Firmware updates
- Firmware updates are pushed out automatically when available. They can't be manually requested.
- They're sent out in phases over a few weeks, so not all users get the update at the same time.
- Updates happen between 1 am and 3 am PST; make sure your gateway is turned on during this time to get the update.
- Do not restart the gateway when it’s updating. The gateway will automatically restart once the update is complete.
To check firmware version...
- From the
T-Mobile Internet App, select MORE>Gateway information. - Review theFirmware version.
Firmware updates
Firmware version | Fixes & Features |
---|---|
14443 | Battery disabled |
11142 |
|
02944 |
|
94432 |
|
93353 |
|
92413 |
|
91646 |
|
90234 | Release version |
Web Gateway User Interface (GUI)
- The Web GUI allows you to access and change the Askey LTE
Wi-Fi Gateway settings. - You must be connected to the Askey LTE
Wi-Fi Gateway throughWi-Fi or Ethernet to access. - The Web GUI is designed to work with most modern browsers like Firefox, Chrome, Edge, and Safari.
- You can receive and send text messages and notifications about your billing and services through the Web GUI (for
T-Mobile Home Internet-only customers).
To log in, open a web browser, visit https://192.168.12.1, and log in with your username and password.
- For devices purchasedbeforeDecember 31, 2019, the default username and password isadmin.
- For devices purchased after December 31, 2019, the default password will match the
Wi-Fi Password on the label.
Web GUI Tutorials
Web Gateway User Interface (GUI)
Network information & settings (Wi-Fi , LTE, APN)
-
SelectBasic>Network>Network Mapto view information on the Internet, Ethernet, and
Wi-Fi connections.- A green check means connected. A red X means disconnected or disabled.
- SelectConnected devices to view a list of devices connected to either LTE or
Wi-Fi . Choose a device to view the MAC and IP addresses for that device.
-
SelectBasic>Network>Statusto view information about your LTE and Home network connections, including:
- IPv4, IPv6, and DNS addresses for the LTE connection
- Signal strength and SIM status for the LTE connection
- MAC and IP addresses for the Askey LTE
Wi-Fi Gateway (LAN) Wi-Fi network name, status, mode, channel, and bandwidth- IMEI, SIM card number (ICCID), Phone number (MSISDN)
-
SelectBasic>Network>LTEto view and change the following LTE settings:
- Internet and SIM status
- Disconnect from the internet
- Data roaming (this setting will not allow you to move your
T-Mobile Home Internet service) - Airplane mode
- Connection profile settings:
- APN:fbb.home
- Username:[blank]
- Password:[blank]
- Authentication Type:None
- PDN Type:IPv6
SIM PIN
T-Mobile does not recommend using a SIM PIN for this device, since it only works in the Askey LTEWi-Fi Gateway and is locked to your location. If the SIM PIN is enabled, you must go to Basic>Network>LTEand enter the SIM PIN every time the Gateway turns on. If you enter the incorrect PIN too many times, you will be prompted to enter the PUK and a new PIN.Contact usif you need your PUK code.SelectExpert>Network>LTEto view SIM Management settings and enable a SIM PIN.
- PIN Protected (on/off): Enter your PIN and selectSave(default PIN is 1234).
- Change PIN (on/off): Enter your current and new PINs, then selectSave.
-
SelectBasic>Network>
Wi-Fi , then choose2.4 GHZor5 GHZat the top to view and change theseWi-Fi settings. You must change 2.4 and 5 GHZ settings separately. Select Saveif you make any changes.- Turn
Wi-Fi on or off - Wireless Name (SSID)
- Wireless Password (must be 12 characters)
- Hide SSID
SelectExpert>Network>
Wi-Fi , then choose2.4 GHZor5 GHZ at the top to view and change these additionalWi-Fi settings. You must change 2.4 and 5 GHz settings separately. Select Save if you make any changes.- Security
- None
- WPA/WPA2-Personal (default)
- Security version
- Mixed WPA/WPA2
- WPA2 (default)
- Encryption
- Wireless mode
- 2.4 GHZ default is 802.11g/n mixed
- 5 GHz default is 802.11a/ac/n mixed
- Channel (default is auto)
- Channel Bandwidth (default is auto)
- Turn
-
SelectExpert>Network>LANto view and change these LAN settings. SelectSaveif you make any changes.
- Basic
- MAC and IP addresses of the Askey LTE
Wi-Fi Gateway - Subnet Mask
- MAC and IP addresses of the Askey LTE
- Advanced
- DHCPS on/off (default is on): The Dynamic Host Configuration Protocol Server (DHCPS) automatically assigns IP addresses to devices that connect via ethernet or
Wi-Fi - IP Address Pool (default is 100 - 150): This is the IP address range the DHCPS can assign. You can't connect more devices than you have IP addresses available to the DHCPS.
- Primary DNS (default is blank): The Domain Name System (DNS) translates web URLs likeT-Mobile.cominto the actual IP address of the web server.
- Secondary DNS (default is blank)
- DHCPS on/off (default is on): The Dynamic Host Configuration Protocol Server (DHCPS) automatically assigns IP addresses to devices that connect via ethernet or
- Basic
-
SelectBasic>Network>Traffic Queryto view information about your data usage.
Need help?
Our Troubleshooting guides can help fix the most common
Check out our Troubleshooting guides
Need help?
Looking for something else?
Return to T-Mobile Internet Support